Other than that, the curved adapter also works wonders reducing unnecessary consumption. The can comes equipped with a red spray nozzle tube that features a curved adapter, making it easier to distribute the cleaner in limited spaces like the front part of the throttle plate location, fuel tanks, etc. The product makes it possible to easily clean intake valves, pistons, and combustion chamber deposits. It will be able to cure hesitation, pings, stalls, flat spots, and rough idle that comes from carbon buildup. It might be able to help you in other areas but the solution has been specifically designed to primarily work with 2- or 4-stroke gasoline engines (including but not limited to GDI engines, standard fuel injected engines, and carbureted engines). This is an engine degreaser and cleaner first and foremost. Sea Foam SS14 is a little less versatile than the previous products. The solution has a faint but pleasant smell to it, making the product the best engine degreaser for close quarters with limited airflow. ![]() In other words, Oil Eater Original will prove just as useful in household, industrial, and commercial settings. It will prove helpful for restaurants, production facilities, garages, HVAC, and more. In terms of industrial uses, this engine cleaner will work wonders with engines (duh), different tools and machinery, floor scrubbers, pressure washers, exhaust hoods, and many different car parts. Of course, we're talking about a concentrated product here, so make sure you're using the dilution chart available on the bottle to achieve maximum performance and value.Īs far as household use is concerned, the product will be able to help you with laundry prespots, stoves, tubs and tiles, floors, carpets, grills and decks, siding, white wall tires, asphalt and concrete driveways, as well as with many other surfaces. The solution is non-toxic, non-corrosive, non-hazardous, and USDA-approved for non-food surfaces. You can use it with all systems, including septic. The formula is water-based and biodegradable. The doesn't contain acids, abrasive, or petroleum solvents. More importantly, it does so in the safest manner possible. The formula is very well able to dissolve grease and oils from just about every surface. Oil Eater Original delivers on the "oil-eating" promise. There isn't much that the product won't allow you to clean and degrease. The formula is as safe as it is functional. In short, POR-15 40101 water based degreaser is probably the best grease remover on the list. More specifically, the cap that doesn't always seal that well after you pop it for the first time. ![]() The only thing we have a problem with is the bottle. It will be able to remove grease, oil, and dirt from many different constructions and parts.Īs far as we can tell, there are no major issues with the formula. On top of that, the solution works just as well on closed systems like air conditioning, compressor lines, boiler tubes, heat exchangers, and different coils. ![]() With it, you'll be able to easily clean and degrease metal, wood, fiberglass, plastic, and different painted surfaces including but not limited to engines, fuel tanks, holding tanks, grease traps, and transformers. It does not incorporate noxious odors, chlorinated solvents, or petroleum products. The formula is non-flammable and water-based. Well, we don't really care for lofty promises like "breakthrough" but we can't say that these people aren't on the money with that premise. According to the people behind the product, the formula here represents a breakthrough in metal cleaners. POR-15 40101 Engine Cleaner Degreaser is about as potent and versatile as they come.
0 Comments
Leave a Reply. |